Microcar / Dué

Exhaust hose for Microcar / Dué : Comfort, protection and longevity

One exhaust adapted to a car-free car brand Microcar or Dué plays an indispensable role. It can absorb engine movements, limit vibrations, prevent cracking of cracks on the tubes and silent, and ensure a good sealing of exhaust gas. Choosing a quality hose is essential to preserve the performance of the vehicle and ensure optimal sound comfort.

Main functions of the exhaust hose

The exhaust system undergoes important mechanical, thermal and vibratory stresses. The exhaust hose compensates for these constraints for the complete line.

Absorption of vibrations and movements

• Limits the vibrations transmitted to the chassis.
• Prevents the tubes from vibrating or cracking.
• Reduces noise noises perceived inside the vehicle.
• Protects supports, necklaces, exhaust line joints.

Protection of sensitive components

Thanks to its flexibility, the hose avoids transmitting mechanical stresses to the collector, silencer or rigid points of the line. This helps to extend the lifetime of these often expensive parts.

Characteristics of a good flexible for Microcar / Dué

To ensure efficiency and durability, a flexible must meet specific technical criteria: materials, diameter, service life, corrosion resistance and warm-cold.

Stainless steel braid

The outer part of the hose is often made of a robust metal braiding. This braid protects the inner tube from exterior shocks and ensures corrosion resistance, significant in wetland or exposed to road salts.

Internal corrugated or smooth tube according to use

A corrugated tube allows more flexibility and tolerance to motor movements. It must be able to withstand hot gases and heat from the collector, without deforming or cracking.

Diameter, length and compatible ends

The diameter must match that of your line so as not to create against-excessive pressure. The length must allow a non-tensionable installation. The ends (rings or sleeves) must adapt to the tightening of exhaust clamps.

Signs of wear of an exhaust hose

A damaged hose can cause perceptible disorders at the sound level, performance or comfort.

Sound symptoms

• Breathing noises or extensiveness at acceleration.
• Increased engine noise (idle or mounted in diet).
• Sizzings or clicks indicating a broken braid.

Visual or mechanical symptoms

• shuffled braid, coupée or damaged.
• Perceptible gas leak (soot, odor) around the junction.
• Collector or tubes near slightly cracked.
• Abnormal displacement or movement too free from the line.

Consequences of a damaged hose

The ignorance of a used flexible can lead to more serious damage in the exhaust line, but also negatively influence comfort, consumption and safety.

Mechanical damage

• Cracks on the tubes or the collector.
• Accelerated wear of necklaces, supports and joints.
• risk of breakage in case of strong jerks or repeated shocks.
• Loss of motor torque linked to a poorly sealed exhaust.

Impact on comfort and safety

• Significant noise nuisance.
• Odors of unpleasant or dangerous gases in the passenger compartment.
• Risk of cons-Visit during technical control.
• Discomfort during trips where the line moves or vibrates.

Preventive maintenance and diagnosis

Regular maintenance detects the first signs of fatigue or wear of the hose.

Frequent visual controls

• Check the condition of the braid every 10,000 to 15,000 km.
• Examine the collars and supports associated with corrosion or loosening.
• Check welds or sleeves ends for fatigue signs.
• Observe the behavior of the hot exhaust line: noise, smoke, vibration.

Good practice

• Replace the hose from the first visible signs of wear.
• Change the necklaces and joints when installing a new hose.
• Use a hose whose technical characteristics are compatible with Microcar / Dué.
• Tighten the necklaces, but without crushing the braid.
• Then check after some trips the good maintenance.

Installing a new hose for Microcar / Dué

The replacement must be carried out carefully to ensure a stable, silent and durable line.

Replacement steps

• Cool the exhaust line before any intervention.
• Loosen existing clamps and remove the defective hose.
• Position the new hose without twisting or tension.
• Tighten the necklaces gradually to ensure sealing and maintenance.
• Check that the exhaust line does not touch the chassis or other moving parts.

Tests after installation

• Start the engine and listen to the noise: leak, vibration, blow.
• Test hot and cold.
• Observe the reaction of the engine to accelerate.
• Check the tightness and maintenance of the hose after several trips.

Catalog Pro VSP : exhaust hoses Microcar / Dué

Pro VSP offers a wide choice of exhaust flexible Compatible with vehicles Microcar / Dué. You will find original or adaptable models, with different lengths, diameters and types of braid, as well as the necklaces needed for a complete installation.

If your vehicle is not a Microcar / Dué

You can consult the general category of hoses and exhaust braids here: Flexible / car exhaust without license.

Budget and replacement cost

The cost of a hose depends on the diameter, the length, the material used (braid, steel), and the manufacturer. Invest in a quality model adapted to Microcar / Dué Advances frequent replacements and increase the durability of the exhaust line.

Typical expenses

• Quality exhaust flexible.
• Alternative collars and joints.
• Hand-if assembly by a professional.
• Check after noise assembly, sealing, vibration.

Also find our community on our forum Avenir VSP !