Frequency

Car Braking Without Permit - Security & Performance

The braking system is an essential part of your VSP. To ensure maximum safety and optimal driving comfort, it is essential to regularly control and replace wear parts: brake pad, brake disc, stirrup, brake drum, brake hose, wheel cylinder, cylinder and brake jaw.

Why regularly maintain the braking of your VSP?

A well-kept braking system provides optimal stopping distances, better stability and reduces the risk of accidents. Braking pieces like the brake pad or the brake disc wear oneself over time. The brake hoses and the cylinder can also age and result in loss of efficiency.

Our products are compatible with the main brands of VSP : Aixam, Ligier, Microcar, Chatenet, JDM, Casalini, Bellier and Grecav.

The main car braking parts without a license

Brake pads

The brake pad are the most solicited elements of the system. They ensure the friction on the brake disc To slow down the vehicle. Replace your pads as soon as the trim thick is too weak or if you hear a squeak.

Brake discs

The Brake disc for car without license must be changed when striped, veiled or too fine. Used discs can cause vibrations and braking loss. Always replace your discs per pair and associate new brake pad For homogeneous braking.

Brake calipers

Thestirrup is responsible for the platelet movement. A seized caliper can block the wheel or reduce the braking efficiency. Check the condition of your stirrups regularly, especially on the VSP older.

Brake drums & jaws

The drum often equip the back of the vehicle. Associated with brake jaw, they guarantee a balanced braking. An oval drum or worn jaws can cause irregular braking.

Brake hoses

The brake hose carry the brake fluid to the brackets and wheel cylinders. Over time, they can crack or push under pressure, reducing braking efficiency. Replace-As soon as they show signs of aging.

Wheel Cylinders & Cylinder Master

The wheel cylinder actune the jaws in the rear drums, while the cylinder distributes the pressure throughout the hydraulic system. Brake fluid leaks are a sign of wear requiring immediate replacement.

Brake accessories and levers

In addition to the main parts, consider checking and maintaining the Handbrake lever, essential for parking safely. We also offer a full range ofbraking accessories for VSP : Screws, hand brake cables, repair kits and more.

Signs of wear and preventative maintenance

Replace your braking parts as soon as you notice:

• Abnormal noises during braking.
• Soft brake pedal or too hard.
• Vibrations in the braking steering wheel.
• Brake fluid leaks.
• Handbrake that loses efficiency.

Regular preventive maintenance of brake pad, brake disc and brake hose avoids costly repairs and extends the life of your VSP.

FAQ - Car Braking Without Permit

When to replace the brake pads?

The brake pad must be replaced when their thickness is less than 2-3 mm or every 10,000 to 15,000 km depending on the use.

How do I know if my discs are worn?

Check the thickness of brake disc And look for deep stripes. If in doubt, replace-the at the same time as your brake pad.

What if my hand brake is ineffective?

One Handbrake lever worn or unresolved may be involved. Replace or adjust-it to guarantee safe parking.

In summary

Maintain the braking system of your VSP is essential for your safety. Check and replace regularly brake pad, brake disc, stirrup, brake drum, brake hose, wheel cylinder, cylinder and brake jaw To drive safely.

Also find our community on our forum Avenir VSP !