Train rolling and shock absorber

Roller Train and Car Shock Absorber without a license

The train is the set of mechanical elements that link between the chassis and the wheels of a car-free car. It includes suspensions, arms, ball joints, rods, bearings and of course the shock absorbers. This set plays a determining role in the handling, comfort and safety of your vehicle. A well maintained rolling rate provides stable driving, optimal braking and regular tire wear.

Composition and function of the train

The train rolling includes several parts that work in synergy. Each component plays a specific role in road behavior:

• Shock absorbers: They absorb shocks and vibrations to maintain permanent contact between the tire and the road.
• Triangles and suspension arms: They connect the wheels to the chassis and allow their vertical movement.
• Balls and rods: They ensure the correct direction and direction of the wheels.
• Wheel bearings: They guarantee a fluid rotation and without friction of the wheels.
• Silent-Blocks: They reduce the vibrations and protect the chassis departing shocks.

Importance of a train in good condition

A rolling rate in perfect condition allows:

• A precise direction and a safe road behavior.
• One effective brakingbecause the wheels remain in contact with the roadway.
• A Uniform tire wear, avoiding premature replacement.
• One improved driving comfort : Less shaking and vibration in the cabin.

Shock absorbers: Role and maintenance

The shock absorbers Are among the most asked parts of the train route. Their role is to control the oscillations of the suspension springs and maintain the wheels plated on the ground. Dampers in good condition provide optimal driving comfort and avoid adhesion losses during emergency turns or braking.

Signs of tired shock absorbers

Here are some revealing signs of shock absorbers to replace:

• The car tends to "tanguate" or rebound excessively on degraded road.
• Length of braking distances, especially on wet road.
• Abnormal or irregular tire wear.
• Visible leaks of shock liquid on the body of the damper.
• Sensation instability in turns or fast maneuvers.

Replacement frequency

The shock absorbers replace on average every 60,000 to 80,000 km, but on a car-free carIt is recommended to control them regularly, especially if you ride on damaged routes or with frequent loads. Tired shock absorbers directly affect handling and increase the risk of accident.

Maintenance and controlling the train

The train Must be inspected periodically to avoid failures and ensure secure driving. Here are some essential control points:

• Joints : Excessive game can cause noise and make the direction blurred.
• Silent state-blocks : If they are cracked or cracked, they must be replaced to avoid vibration.
• Status of bearings : Listen to any deaf rolling noise, tired bearing sign.
• Geometry and parallelism : Regular adjustment avoids irregular tire wear and improves stability.

Impact of bad interview

A neglected train can cause:

• A loss of control in turns or sudden braking.
• An increase in braking distances.
• Fast and expensive wear of tires.
• Vibrations and discomfort of permanent driving.

Changing the rolls of the train

When one of the rolling train parts is worn, it is advisable to check the entire system. For example, if you replace a suspension ball, also check the dampers, rods and parallelism. A preventive replacement of several elements at a time can reduce hand costs-and guarantee a sustainable result.

General replacement procedure

The replacement steps depend on the part concerned, but generally follow this process:

• Secure the vehicle and lift the wheel concerned.
• Disassemble the wheel and access the component to be replaced.
• Remove the worn out (shock absorber, ball, rod) and clean the contact surfaces.
• Install the new part respecting the recommended tightening torques.
• Check the lack of play and perform a road test.
• Adjust the parallelism if necessary to prevent premature wear of the tires.

Additional steering parts

For complete maintenance, it is recommended to also check the steering elements that are directly related to the train route. Find all the selection of steering parts, including ball joints, rods and racks here: Car parts for no license.

Criteria of choice of quality pieces

When replacing a rolling train or shock absorber, make sure to choose:

• Parts complying with the original dimensions for easy mounting.
• Robust and corrosion-resistant materials.
• Products offering good quality/prices and tested for sustainability.
• Brands recognized for their reliability on unmatched cars.

Why regularly maintain the train

A regular removal train is prolonging the life of your vehicle, ensures optimal comfort and reduces the risk of failure. This also allows you to avoid expensive repairs that may occur when a defective part causes premature wear of other components.

Conclusion

The train and the shock absorbers your car-free car play a crucial role for your safety and comfort. Regular maintenance, the preventive replacement of worn parts and the control of geometry are essential for driving in all serenity. Whether for replacing a tired shock absorber, a suspension ball or wheel bearing, choose quality parts for your vehicle.

Also find our community on our forum Avenir VSP !