Belt and car drive without a license: complete guide

The dimmer belt and the drives are key elements of the transmission of a car-free car. Together, they ensure the transfer of the power of the engine to the wheels permanently adapting the transmission ratio. Belt and inverter at the best price for car without a license : On this page, discover our tips to choose it, maintain and replace your dimmer belt as well as your drives.

Role of the belt and drive on a car without a license

The continuous variation (CVT) transmission system without license is based on two main pulleys and a trapezoidal belt. The drive is on the engine side and vary the width of the groove depending on the diet, while the box (Also called secondary pulley) adjusts on the gearbox. The dimmer belt Move between these two pulleys and thus modifies the transmission ratio to optimize acceleration and peak speed.

Why replace the drive belt regularly?

A dimmer belt is a wear room. Over time, it lies down, cracks and loses efficiency. A worn belt can cause:

• To-stroke
• A peak speed loss
• Slow or irregular acceleration
• Hissing noises
• A risk of rupture while driving

To avoid a failure, it is advisable to regularly check the state of the belt and drive and replace them according to the recommendations (often between 8,000 and 12,000 km).

The different types of car drivers without a license

There are mainly two types of drives:

• Drive : Engine side, it manages the opening and closing of the primary pulley.
• Box : Transmission side, it adjusts the tension of the belt and adapts to the load.

These two elements must work together to ensure a fluid passage of the reports. If one of them is worn or seized, the belt can skate or deteriorate prematurely.

Symptoms of a motor drive or used box drive

Several signs can alert you:

• Unusual vibrations at startup
• Loss of power or abnormally high engine speed
• Metal noise or rattling from transmission
• Fast or irregular wear of the drive belt

In this case, it may be necessary to replace or repair the complete drive, or change certain internal parts such as rollers, springs or axes.

Available drive spare parts

You can also buy separate components to revise your drive: rollers, axes, springs, flanges and guides are available in our dedicated category Car driver parts without a license.

How to choose your drive belt

The choice of a dimmer belt is done in use:

• Of the brand of your car without a license (Aixam, Ligier, Microcar, etc.)
• Exact dimensions (length, width and angle)
• Drive type used (original or reinforced drive)

Use an inadequate belt can cause premature wear and performance loss.

Installation and maintenance tips

When replacing your dimmer belt, Disassemble the motor drive, clean the flanges and control the roller status. Reassemble everything with recommended clamping torques. After installation, make a few kilometers smooth for the belt to put it correctly in place.

Preventive maintenance of the drive

One drive or box Well maintained delighted the life of the belt and get better performance. Check and replace the rollers and springs if necessary, lightly lubricate the axes if the manufacturer recommends it.

Why buy your belts and drives at Pro piece VSP?

By commanding our shop, you benefit from:

• Of Variator belts and motor drives quality
• A wide choice for all car marks without a license
• A stock available immediately
• Fast delivery and technical advice

When to replace the complete drive?

If the drive has a large wear and inventory, from-Persistent shots, flat pebbles or lacked flanges, it is often more economical to replace the complete drive rather than changing parts per piece.

Conclusion

The belt and drive are the heart of the transmission of a car-free car. To ensure optimal operation, monitor their condition, replace-At regular intervals and maintain your transmission system. Belt and inverter at the best price for car without a license : Trust Pro Piece VSP for full choice and adapted tips.

Also find our community on our forum Avenir VSP !