Before

Front wheel bearing for car without a license

The front wheel bearing is an essential component of train all car-free car. It allows the wheel before turning freely around its axis while supporting the vertical loads, the lateral forces during turns and braking forces. A bearing in good condition guarantees a silent pipe, a precise direction, stable braking and uniform tire wear. Conversely, a faulty bearing can cause noise, vibrations, dangerous game in the wheel and even a safety risk if the problem is ignored.

Function and role of front wheel bearing

The front wheel bearing is in the hub or hub holder and allows you to:

• Reduce friction so that the front wheel rotates easily.
• Support the weight of the vehicle and dynamic loads (braking, turning).
• Maintain the axis of the wheel well aligned to ensure a correct geometry of the front train.
• Limit noises and vibrations for optimal comfort.

Importance on the front train

On the front train, the Wheel bearings are even more solicited than those of the back, because they must in addition to support the management efforts. A fault at the front impacted directly the handling and can make the direction blurred or unstable.

Symptoms of a worn wheel bearing

Here are the most common signs that indicate that front wheel bearing is at the end of life:

• Rolling or buzzing noise that increases with speed.
• Noise that changes intensity depending on the turning (stronger in a turn).
• Side game in the front wheel when the vehicle is lifted.
• Vibrations felt in the steering wheel, especially at average or high speed.
• Irregular wear of front tires despite a correct parallelism.
• Bearing that heats or smell metal after a path.

Difference between front and rear bearing

It is important not to confuse a front wheel bearing with a rear wheel bearing. The mechanical stresses are not the same: at the back, the bearing supports less steering effort but remains crucial for stability. If your problem is at the back of the vehicle, consult the dedicated category instead: Rear wheel bearing for car without a license.

Causes of failure

Several reasons can explain the premature wear of a front wheel bearing:

• Repeated shocks (sidewalks, nests-of-hen back-donkey taken too fast).
• Lack of sealing (water, salt, dust) causing internal corrosion.
• Bad tightening torque of the hub nut.
• Bearing bad quality or non-compliant with manufacturer's ratings.
• Incorrect mounting that damaged the new bearing.

When to replace a front wheel bearing

Replacement is recommended as soon as:

• The noise is clearly audible even at low speed.
• A game is detected when checking the front train.
• Vibrations become embarrassing in the steering wheel.
• The wear of the tires before becomes abnormal.
• After an accident or a violent shock on the front wheel.

Complementary controls

When replacing a front wheel bearing, it is advisable to check:

• The hub and the hub holder: no crack or deformation.
• Steering ball joints and suspension arms.
• The parallelism and the alignment of the front train.
• The condition of the discs and brake pads.

General replacement procedure

Here are the big steps to change a front wheel bearing :

• Raise the vehicle and secure with candles.
• Disassemble the front wheel and remove the brake caliper and disc.
• Remove the hub or access the bearing slot.
• Extract the worn bearing with a press or extractor.
• Clean the housing, inspect the worn and replace the seals if necessary.
• Mount the new bearing using the right method (support on the right ring).
• Reassemble the hub, disk, caliper and wheel.
• Perform a road test to ensure no noise or vibration.

Benefits of a quality bearing

A top quality bearing offers:

• Silent rotation and without hard point.
• Better durability and corrosion resistance.
• Perfect fit in the original hub.
• Optimal handling and a more precise direction.

Maintenance tips

To extend the life of your front wheel bearings :

• Avoid shocks against sidewalks and obstacles.
• Check the wheels game with each interview.
• Regularly check the condition of the bellows of transmission and sealing.
• Use quality pieces and fats when mounting.

Why buy from Pro VSP

Pro VSP offers a full range of front wheel bearings For cars without a license, selected for their reliability, robustness and perfect compatibility. You benefit from an expert customer service to help you identify the right room, fast shipping and excellent quality ratio/price.

Conclusion

The front wheel bearing is a vital part for the safety and handling of your car-free car. Do not neglect the first signs of failure and replace the bearing as needed to avoid premature wear of other components and preserve your driving comfort. If your problem is back, make-you in the category dedicated to Rear wheel bearings.

Also find our community on our forum Avenir VSP !