Aixam / Minauto

Suspension ball for Aixam

The suspension ball is an essential part of the train before your Aixam. This part plays a key role in the connection between the suspension triangle and the wheel hub. It ensures the swivel movement of the wheel while maintaining the geometry of the suspension, thus guaranteeing a safe handling, precise turning and optimal driving comfort. A suspension ball in good condition is essential to avoid the game in the front train, noise noise and irregular tire wear.

Role of the suspension ball

The suspension ball is used as pivotal point between the suspension triangle and the wheel rocket. Its spherical articulation allows the wheels to mount and descend by following the irregularities of the road while remaining well aligned. On a Aixam, this part contributes directly to the precision of the steering wheel and the general stability of the vehicle. Without it, the front train could not properly absorb shocks, which would compromise the safety.

Symptoms of a worn suspension ball

Several signs may indicate that it is time to replace your suspension ball :

• CLOCITY SOIPS : heard by going on bumps or maneuvering at low speed.
• Wheel in the wheel : perceptible by shaking the wheel in the adjacent position.
• Vibration : Feeling in the steering wheel, a sign that the wheel is no longer guided.
• Irregular tire wear : caused by a misalignment due to a defective ball.
• Fuzzy direction : Loss of precision, sensation instability or floating in turns.

As soon as these symptoms occur, it is strongly recommended to control the suspension ball to prevent premature wear of the triangle or hub.

Protection bellows: importance for longevity

The suspension ball is protected by a rubber bellows which keeps the fat inside and prevents water, dust and impurities to penetrate. A torn or cracked bellows quickly causes the ball to wear. When replacing, check the condition of the bellows and replace-The if necessary to preserve your new room and guarantee its durability.

When to replace the suspension ball

The replacement of the suspension ball becomes essential in the following cases:

• Presence of game detected during technical control or routine maintenance.
• Persistent snaps from the front train.
• Damaged ball bellows leaving dirt.
• Following an important shock (nest-of-Pool, sidewalk) that may have damaged the articulation.
• If tire wear is abnormal despite a correct parallelism.

Maintenance and verification

Regular train check before your Aixam Prolongs the life of your suspension ball joints. Here are the good practices:

• Visually check the condition of the bellows at each maintenance.
• Lift the vehicle and control the game by shaking the wheel laterally and vertically.
• Listen to noises in slow maneuvers or degraded road.
• Check the parallelism after any replacement of joint or suspension triangle.

General replacement procedure

Here are the main steps to replace a suspension ball :

• Put the vehicle on candles and disassemble the wheel concerned.
• Loosen the ball nut and dismine the hub (recommended extractor).
• If the ball is integrated with the triangle, disassemble the complete triangle to replace the set.
• Clean the contact surfaces and install the new ball or complete triangle.
• Tighten to the prescribed torque, check the absence of a game and reassemble the wheel.
• Perform a road test and, if necessary, a setting of the parallelism.

Suspension triangle: associated part

The suspension ball is often mounted on the suspension triangle. If the latter is worn, twisted or cracked, it is better to replace the set. This avoids future interventions and guarantees a sustainable result. You can find the triangle before for Aixam Here: Front triangle for Aixam.

Criteria for choosing a good suspension ball

To ensure the safety and longevity of your front train, opt for a suspension ball:

• Made of high quality steel and treated against corrosion.
• With a water resistant to water, salt and UV.
• Compatible with the original geometry of your Aixam.
• Offering a fluid and hard point movement from the installation.

Importance for security

A suspension ball In good condition is essential to maintain a stable direction and good grip, especially in turns or during emergency braking. A worn ball can break, resulting in the loss of the wheel and a serious risk of accident. It is therefore essential to never neglect its replacement.

Why buy your parts at Pro VSP

Pro VSP Select for you from suspension ball joints And some suspension triangles quality for Aixam. Our parts are tested to withstand daily constraints, ensuring safe driving. We offer fast delivery, competent customer support and competitive prices to effectively maintain your car without a license.

Conclusion

The suspension ball is a key element of the comfort and safety of your Aixam. In case of game, noise or visible wear of the bellows, replace-The without waiting and check the condition of the suspension triangle. A preventive maintenance of the front train guarantees a precise direction, optimum handling and regular wear of your tires.

Also find our community on our forum Avenir VSP !