4,6 / 5

See all customer reviews

Greaves

Glow plug for engine Greaves

The Glow plug is an essential part for any motor Greaves Mounted on a car without a diesel license. Its role is to facilitate cold start by heating air from the combustion chamber before fuel injection. A preheating spark plug in good condition guarantees a reliable start, clean combustion and reduced white smoke emissions.

Operation of a glow plug Greaves

On an engine Greaves, the preheating plug is triggered as soon as you put the contact. It quickly raises the temperature of the combustion chamber so that the air mixture-Fuel can ignite properly by compression. This is particularly important when the outside temperature is low or after a long immobilization of the vehicle.

Key role

• Heat the air quickly from the combustion chamber.
• Facilitate start-up even by negative temperatures.
• Limit the production of white smoke at startup.
• Protect the motor against wear related to repeated starts.
• Optimize combustion to reduce fuel consumption.

Advantages of a candle adapted to the engine Greaves

The glow plug designed for engines Greaves Respects the specifications in terms of length, threading and resistance. Use an unsuitable candle can cause bad start, overconsumption or even damage the engine. The references proposed on Pro VSP are selected for their compatibility and reliability.

When to replace your preheating candles Greaves

Even if they are robust, glow plugs wear over time. Regular checking avoids failures and ensuring optimal start.

Symptoms indicating a worn candle

• Difficult start or engine running on three cylinders at the beginning.
• Persistent white smoke after startup.
• Preheating indicator that stays lit longer than normal.
• Irregular noises when starting the engine.
• Fuel consumption slightly higher than usual.

Control and diagnosis

• Disassemble each candle and check its visual condition.
• Measure the resistance with a multimeter (value out of tolerance = replacement).
• Inspect the cables and connectors to make sure they are not oxidized.
• Check the preheating relay if several candles seem out of service.
• Replace full game candles to prevent combustion imbalances.

Tips for replacing

Replacing a preheating plug properly is crucial to avoid damaging the thread of the cylinder head.

Precautions before assembly

• Allow the engine to cool before any intervention.
• Disconnect the battery to prevent short-Circuit.
• Use a quality key tailored to the thread.
• Apply a tightening torque recommended by the manufacturer.
• Slightly clean the well before mounting the new candle.

After replacing

• Check that the preheating indicator lights up and goes off normally.
• Start the engine and observe the absence of excessive smoke.
• Repeat the operation on all candles for homogeneous operation.
• Check the battery voltage and the preheating circuit.
• Make a road test to confirm the reactivity of the engine.

Catalog Pro VSP : Glow plugs Greaves

Pro VSP offers a full range of Glow plugs Compatible with engines Greaves. Each product sheet specifies the dimensions, threading and electrical characteristics to ensure you a choice without error.

If your engine is not a Greaves

Consult our general preheating candles for cars without a diesel license by clicking here: Car preheating candle without a license.

Budget & Costs

The price of a preheating candle Lombardini Depends on the model and quality. It is often recommended to replace all candles at the same time to avoid start-up imbalances. Also count the cost of the hand-if you do not realize the operation you-same.

Typical expenses

• Complete set of glow plugs.
• Whether damaged connectors or beam.
• Preheating relay if necessary.
• Hand-for assembly.
• Start test after intervention.

Good practices to extend the service life

• Always wait for the extinguishing of the LED before starting.
• Maintain well charged battery for effective preheating.
• Clean the connectors regularly.
• Avoid forceting startup if the engine has not preheated properly.
• Replace preventive candles every 30,000 to 40,000 km depending on.

Also find our community on our forum Avenir VSP !

Preheating candle at the best price car without license Greaves
Showing 1-1 of 1 item(s)

You are currently viewing new products only, to view all products,

You are currently viewing used products only, to view all products,
%product-name% / %summary% / %shop-name%

Glow plug

Ligier JS50 Phase 5, Myli , JS60 Xl / Engine Greaves E5, E5 +

New-origin

Available within 1 to 2 days
Price
€18.25