Mitsubishi

Glow plug Mitsubishi : Reliable start for your car without a diesel license

The Glow plug motor Mitsubishi is an essential part for any license car equipped with a diesel engine. It allows to wear the combustion chamber at an adequate temperature before starting, which improves combustion, reduces white smoke and facilitates departures in cold weather. A well-adapted glow plug gives flexibility at startup and protects the diesel system over time.

Operation of a motor preheating candle Mitsubishi

A glow plug Mitsubishi Works by producing a high temperature in the combustion chamber before fuel injection. Unlike gasoline engines, the diesel engine is based on compression to turn on the fuel, which requires air and walls are already hot enough. It is here that the candle occurs: as soon as you put the contact, it heats the cylinder to allow a quick and efficient combustion.

Main role

• Preheat the combustion chamber to reduce the startup time.
• Avoid excessive white smoke at startup.
• Reduce the starter and battery wear.
• Promote complete combustion from the first instants.
• Improve overall performance in everyday use, even in winter.

Engine compatibility Mitsubishi

The candles Mitsubishi Proposed are designed according to the recommended specifications: length, no thread, suitable thermal resistance, preheat power. Use an inadequate glow plug may result in difficult starts, incomplete combustion or mechanical damage. On Pro VSP, the data sheets specify these elements to help you choose the right room.

When to replace your preheating candle Mitsubishi

Glow plugs are wear parts. Even if they are robust, their effectiveness decreases over time. The following signs indicate that it is time to control them or replace them:

Starter or electric symptoms

• Slow start or multiple attempts needed when the engine is cold.
• Preheating indicator that stays on longer than usual.
• Battery that seems tired at launch.
• White smoke visible at the exhaust during the first engine laps.
• Odor of unburned fuel at startup.

Mechanical or visual symptoms

• Candles with carbon deposits or soot on the tip.
• Resistance measured in the multimeter out of normal range.
• Connectors or wiring of corroded or damaged preheating system.
• Used threads or damaged candle body.
• Irregular combustion in the moments after a cold start.

Diagnosis and maintenance of preheating candles Mitsubishi

A good interview not only prevents breakdowns, but also to save fuel and preserve the engine. Here are some steps to check the status of candles:

Recommended control stages

• Disassemble the candle for visual inspection and cleaning if necessary.
• Measure the electrical resistance of the cold candle.
• Check the preheating relay or the power supply system.
• Make sure the battery is busy; A low battery compromises operation.
• Observe the cold start behavior: smoke, time, noise.

Good maintenance reflexes

• Replace full-set candles to ensure combustion symmetry.
• Regularly clean the connectors and control of the lugs, avoid oxidation.
• Check the voltage of the preheating circuit.
• Preheat if the outside temperature is low before starting.
• Program an inspection before periods of cold weather.

Replacement of preheating candles Mitsubishi

The replacement must be done with care to preserve the engine performance. A properly climb candle avoids leaks, missed and laborious starts.

Precautions to take

• Allow the engine to cool before any intervention.
• Disconnect the battery.
• Use the appropriate tools to avoid damaging the thread.
• Check that the new candle is compliant with the engine specifications Mitsubishi.
• Apply the appropriate tightening torque.

Test after replacement

• Check that the preheating indicator lights up and then goes out properly.
• Start cold and observe the disappearance of previous symptoms (white smoke, start-up time).
• Check idle stability.
• Inspect connections after a few start-up cycles.

Catalog Pro VSP : Glow plugs for Mitsubishi

Pro VSP proposes a selection of Glow plugs Compatible with engines Mitsubishi. The pieces are chosen for their robustness, quality and technical compliance. Product cards detail features such as threading, length and thermal resistance.

If your engine is not Mitsubishi

See the general selection on the page dedicated to Diesel Glow Candles for Cars without a license: Car preheating candle without a license

Budget & Associated Costs

The cost of a candle Mitsubishi Depends on the quality, manufacturer, and its thermal resistance. Replace all candles at the same time is often recommended to avoid imbalances in combustion.

Typical expenses to be expected

• Complete game of preheating candles Mitsubishi.
• Replacement connectors or wiring if necessary.
• Preheating relay if faulty.
• Hand-to replace.
• Getting up test after intervention.

Good practices to extend the service life

• Always wait for the preheating light to go out before starting the starter.
• Keep the battery in good charge.
• Do not attempt cold repeated starts if preheating has not effect.
• Keep clean connectors.
• Replace the candles from the first signs of weakness.

Also find our community on our forum Avenir VSP !