MGO 1 / 2

Car body without license Microcar MGO 1 / 2

You have a car without a license Microcar MGO 1 or MGO 2 And you are looking for reliable, robust and perfectly compatible body parts? This page includes a wide selection of components to restore, repair or replace the bodywork of your MGO 1 / 2. You will find wings, side panels, winds-Front and rear shocks, hood, tailgate, exterior accessories and decorative finishes. Each piece is designed to meet the original attachment points to ensure accurate assembly, good alignment and a neat visual rendering for your vehicle without a license.

Body parts categories for Microcar MGO 1 / 2

Wings and side panels

Front wings, rear wings and side panels are often exposed to shocks, tight parking or gravel projections. For MGO 1 / 2, new lateral wings and panels faithfully reproduce forms, curves and attachments of origin. They allow direct replacement without structural modification, to restore the lateral appearance of your car without a license.

Pare-Front and back shocks

The winds-shocks contribute to external protection but also to the aesthetics. For the MGO 1 / 2, the winds-Proposed front and rear shocks are available in raw version to paint or already painted according to the hue of your vehicle. They settle on the original media, providing effective absorption of small shocks and now a uniform aesthetic.

Hood, tailgate and rear elements

The front cover, the rear hatch and visible back panels are visible parts that strongly define the silhouette of the vehicle. Our pieces for MGO 1 / 2 Respect the hinges, lock points, outdoor outlines and original flanges. A good alignment of these elements ensures a clear closure, avoid water infiltration, reduce vibrations and preserve aesthetic rendering.

Exterior accessories and decorative finishes

To perfect the body, we also offer door handles, mirror hulls, decorative chopsticks, griller grills, hubcaps, tailings suitable. These finishing pieces make it possible to restore an original appearance or customize your MGO 1 / 2 While preserving visual homogeneity on the entire bodywork.

Services and helpful tips for bodywork MGO 1 / 2

Pre-order verification

Before any order, ensure-you that your vehicle is a good Microcar MGO 1 or MGO 2. Check the version, the hue, the setting points of the part to be replaced as well as the status of existing fasteners around. If you have a doubt, compare with parts already mounted or send a photo to customer service. Careful verification avoids compatibility and feedback errors.

Express delivery

Body parts for MGO 1 / 2 are shipped in express delivery everywhere in France. The components are carefully packaged to avoid scratches, bumps or deformations during transport, so you can receive your parts quickly and install them in the best conditions.

Installation and alignment of parts

The rooms provided are designed to fit the original anchor points. After mounting, check the alignment between wings, doors, winds-shocks, hood and tailgate. A good alignment ensures a clean closure, reduces the games or vibrations, avoids water infiltration or wind noise, and improves the general aesthetics of your bodyless body.

Redirection if it's not a MGO 1 / 2

If your car without a license is not a Microcar MGO 1 / 2 or if you do not find the desired part here, see the General Bodywork category Microcar : Car body without license Microcar

Why our body parts for MGO 1 / 2 are reliable

• Compatibility assured with the original bodies of the bodywork MGO 1 / 2
• Shock-resistant materials, weatherproof and adapted to daily urban use
• Raw finishes to paint or already painted according to your aesthetic preferences or budget
• Wide range of rooms covering wings, winds-shocks, hood, tailgate, side panels and exterior accessories
• Customer service available to advise you if you have any doubt about the reference to choose
• Fast delivery for your vehicle to regain its aesthetic and functional appearance without prolonged delay

FAQ - Frequently Asked Questions Bodywork Microcar MGO 1 / 2

The pieces are-they identical to the original parts?

Some rooms come from the manufacturer, others are high quality equivalents. All are verified to match the dimensions, attachment points and tolerances planned for Microcar MGO 1 / 2. For example, the winds-shocks / Rear available in catalog for these models.

Then-I paint a brute room me-Even?

Yes I do. For raw pieces, it is enough to prepare the surface (sanding, primer, cleaning), then apply the paint and possibly a varnish to obtain a uniform and durable finish.

What is the reception time?

With express delivery, you will usually receive your rooms within 24 to 72 hours depending on your department, as soon as the item is in stock. : contentreference[oaicite:1]{index=1}

Conclusion

This page brings together all the body parts needed for your car without a license Microcar MGO 1 / 2. that you want to replace a windshield-Shocks, restoring a wing, adjust a side panel or outdoor accessory, each proposed component is designed to adapt, last in time and offer a neat appearance.

Bodywork at the best price for car without a license Microcar MGO 1 / 2.

Also find our community on our forum Avenir VSP !